Device Monitoring Studio - TODO
Docs

Read/Write Multiple Registers Rollout (response)

This rollout is used to configure Read-Write Multiple Registers function response parameters.

Below are the steps you need to perform to configure the Read-Write Multiple Registers function response parameters properly.

  1. Enter the number of registers value in Register Count field. It can be a number from 0 to 120. See the registers added into the list or removed from it. By default, all of them have 0 value.
  2. To change the value of register, do the following: select the register in the list, enter register value into Register Value field, click the Set button (or press ENTER).
  3. Repeat previous step until you've finished.

Note: you can use “fast register entering” method. It is used when there is a large number of registers. Repeat these steps:

  1. Select the first register in list.
  2. Enter register value into the Register Value edit box.
  3. Press the ENTER key. The highlighted register's value will be updated and the next register becomes active. Repeat steps 2 and 3 for each remaining register.

The context menu offers you the following functions:

Save to file
Saves all entered register values to comma-separated file (.CSV).
Load from file
Loads register values from comma-separated file (.CSV).